Nº535H

Highlights

  • Reliable, high-power in four different channel configurations provide ideal solutions for any system
  • Ethernet and 12V trigger control capability for system integration
  • Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
  • Fully-differential circuitry with both balanced XLR and single-ended RCA inputs

Awards & Accolades

  • 2011

    Review by Bob Archer

    CEPro

  • 2011

    Review by Mike Marks

    Widescreen Review

  • 2011

    ADEX Award for the No500H Series Amplifiers

    Design Journal

  • 2010

    "CE Pro’s Editor’s Picks: Top Products of 2010" Award

    CEPro

Nº535H

As the first five-channel amplifier from Mark Levinson, the Nº535H sets the bar high. Using a semimono-block design like the Nº533H, the Nº535H can deliver 200W per channel into all five channels simultaneously. Twelve output transistors and large amounts of capacitance per channel ensure that this amplifier is more than capable of delivering realistic dynamics and transients with audiophile-grade detail and response for even the most demanding audio tracks.

The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.


Frequency Response

within 0.5dB from 10Hz to 20kHz

Input Impedance

60 kΩ (balanced); 30 kΩ (unbalanced)

Input Sensitivity

2.83Vrms output at 130mVrms input

Height

(with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm)

Width

17.75" (45.1cm)

Depth

19.83" (50.4cm)

Weight

Net weight: 98.5 lbs (44.7kg); Shipping weight: 108.5 lbs (49.2kg)

Communication and Control

one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector

Inputs

Five balanced XLR inputs; five unbalanced RCA inputs

Rated Output Power into 8 ohms

200W/ch (20Hz to 20kHz at

Signal-to-Noise Ratio

>85dB, reference level: 2.83 Vrms

Gain

26.8dB

Power Requirements

100V~, 120V~, 230V~, factory set for destination country

Speaker Connections

five pairs loudspeaker outputs with banana-plug sockets (banana-plug socket not available on the 230 VAC models)