Nº533H

Highlights

  • Reliable, high-power in four different channel configurations provide ideal solutions for any system
  • Ethernet and 12V trigger control capability for system integration
  • Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
  • Fully-differential circuitry with both balanced XLR and single-ended RCA inputs

Awards & Accolades

Nº533H

The Nº533H shares the same basic amplifier module as the Nº531H and Nº532H but is a semi-monoblock design. With power supplies that can be shared across multiple channels, this design lends itself well to multi-channel environments where one channel might need more power at times than others. All other features of the Nº533H are identical to the Nº531H and Nº532H and the common design creates a consistent sonic signature for use in multiple amplifier system configurations.

The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.


Frequency Response

within 0.5dB from 10Hz to 20kHz

Input Impedance

60 kΩ (balanced); 30 kΩ (unbalanced)

Input Sensitivity

2.83Vrms output at 130mVrms input

Height

(with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm)

Width

17.75" (45.1cm)

Depth

19.83" (50.4cm)

Weight

Net Weight: 90.0 lbs (40.8kg) Shipping weight: 100.0 lbs (45.4kg)

Communication and Control

one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector

Inputs

two balanced XLR inputs; two unbalanced RCA inputs

Rated Output Power into 8 ohms

300W/ch (20Hz to 20kHz at

Signal-to-Noise Ratio

>85dB, reference level: 2.83 Vrms

Gain

26.8dB

Power Requirements

100V~, 120V~, 230V~, factory set for destination country;

Speaker Connections

one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)